View MAS9161B1GB06_3906945.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

da9161.010 28 january 2004 1 (17) mas9161 80 ma ldo voltage regulator ic ? only 10.5 a ground pin current at 1 ma load current ? good transient performance ? low dropout voltage: 200 mv ? low noise ? enable/disable control ? stable with low-esr output capacitors description mas9161 ldo voltage regulator is optimized for operation at low ground pin current of just 10.5 a. this combined with the good overall performance makes mas9161 very suitable for providing continuous supply in low power circuits. the performance of mas9161 benefits applications where standby periods are long and where long battery life is essential. in addition to the low ground pin current, mas9161 excels in dropout voltage (200 mv typical at 80 ma). even though mas9161 does not use an external bypass capacitor, the noise level (100 hz? 100 khz) is only 70 vrms with 1 f output capacitor. the equivalent series resistance (esr) range of output capacitors that can be used with mas9161 is very wide. this esr range from zero up to a couple of ohms combined with no minimum output current requirement makes the usage of mas9161 easier and low in cost. enable/disable pin allows mas9161 to be turned off and on. in order to save power the device enters the sleep mode when the regulator is disabled. mas9161a also includes an auto-discharge function, wherein a shutdown transistor turns on and discharges the output capacitor. mas9161b does not feature an auto-discharge function. an internal thermal protection circuit prevents the device from overheating. also the maximum output current is internally limited. features applications ? extremely low current consumption ? good transient performance ? output accuracy < 3.3% ? internal thermal shutdown ? short circuit protection ? thin sot (tsot-5) or wl-csp package ? several output voltage options available, see ordering information p. 15 ? continuously working low power circuits ? bluetooth modules ? digital circuits ? real-time clocks (rtc) ? srams ? cmos backup power ? cellular phones ? portable systems ? smoke detectors
da9161.010 28 january 2004 2 (17) pin configuration tsot-5 top view 1 2 3 5 vin vout ctrl gnd n/c 61ax 4 for top marking information see ordering information p. 15 wl-csp bottom view a3 a1 c3 c1 b2 top view pin a1 designator 61xy for top marking information see ordering information p. 15 pin description pin number in wl-csp pin name pin number in tsot-5 pin order 11 note 1 pin order 12 note 2 type function vin 1 c3 c3 p power supply voltage gnd 2 b2 a1 g ground ctrl 3 a1 a3 i enable/disable pin for regulator n/c 4 a3 b2 - not connected vout 5 c1 c1 o output g = ground, i = input, o = output, p = power note 1: wl-csp pin order 11 is pin compatible with lp3985. note 2: wl-csp pin order 12 is pin compatible with lp2985. a1 a3 b2 c1 c3
da9161.010 28 january 2004 3 (17) block diagram absolute maximum ratings all voltages with respect to ground. parameter symbol condi tions min max unit supply voltage v in -0.3 6 v voltage range for all pins -0.3 v in + 0.3 v esd rating hbm 2 kv junction temperature t jmax +175 (limited) c storage temperature t s -55 +150 c stresses beyond those listed may cause permanent damage to the device. the device may not operate under these conditions, but i t will not be destroyed. recommended operating conditions all voltages with respect to ground. parameter symbol condi tions min max unit operating junction temperature t j -40 +125 c operating ambient temperature t a -40 +85 c v out(nom) + 0.3 v operating supply voltage v in for 1.5 v & 1.8 v output options 2.5 5.3 v ctrl vin vout gnd over current / over temperature protection voltage reference + n/c
da9161.010 28 january 2004 4 (17) electrical characteristics thermal protection t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditions min typ max unit threshold t 130 150 175 c control terminal specifications t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditi ons min typ max unit control voltage off state on state v ctrl -0.3 1.2 0.5 v in + 0.3 v control current i ctrl v ctrl = 1.2 v v ctrl = 2.0 v v ctrl = 3.8 v 0.35 0.70 1.50 1.5 a if ctrl-pin is not connected, mas9161 is in off state (4 m ? pull-down resistor to ground). voltage parameters t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditi ons min typ max unit output voltage tolerance v out i out = 0 ma i out = 50 ma v out(nom) ? 0.06 v out(nom) ? 0.08 v out(nom) + 0.06 v out(nom) + 0.06 v dropout voltage v drop i out = 1 ma i out = 10 ma i out = 50 ma i out = 80 ma 5 50 150 200 mv current parameters t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditions min typ max unit continuous output current i out 0 80 ma short circuit current i max r l = 0 ? 300 ma peak output current i pk v out > 95% * v out(nom) 120 ma ground pin current i gnd v ctrl = 2.0 v i out = 0 ma i out = 1 ma i out = 10 ma i out = 80 ma 10 10.5 16 61 a t a = + 27c 0.01 0.5 mas9161a, v ctrl = 0 v, v out = 0 v t a = + 85c 0.2 4 t a = + 27c, v out = 0 v 0.3 t a = + 27c v out = 2.7 v 4.3 t a = + 85c, v out = 0 v 0.4 ground pin current, sleep mode i gnd mas9161b, v ctrl = 0 v t a = + 85c v out = 2.7 v 4.4 a
da9161.010 28 january 2004 5 (17) power dissipation t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditi ons min typ max unit thermal test board according to jesd51-7 (4 layers), tsot-5 package 207 thermal resistance (junction-to-air) r ja mounted on mas9161 csp evaluation board, wl-csp package 210 c/w maximum power dissipation p d any ambient temperature ja a (max) j max d r t t p ? = w note 1 note 1: t j(max) denotes maximum operating junction temperature (+125c), t a ambient temperature, and r ja junction-to-air thermal resistance specified above. line and load regulation t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditions min typ max unit line regulation v out(nom) + 1 v < v in < 5.3 v, i out = 10 ma 1.0 3 mv load regulation i out = 1 ma to 80 ma 12 24 mv noise and ri pple rejection t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditions min typ max unit output noise voltage v rms 100 hz < f < 100 khz, i out = 10 ma 70 vrms noise density v n i out = 10 ma, f = 10 khz 300 hz nv i out = 1 ma f = 1 khz f = 10 khz f = 100 khz 50 30 30 db psrr i out = 10 ma f = 1 khz f = 10 khz f = 100 khz 50 30 30 db
da9161.010 28 january 2004 6 (17) dynamic parameters t a = -40c to +85c, typical values at t a = +27c, v in = v out(nom) + 1 v, i out = 1 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. parameter symbol conditi ons min typ max unit start-up delay v ctrl = 0 to 2.4 v, i out = 10 ma (see figure 1 below) 0.5 ms overshoot v ctrl = 0 to 2.4 v 1.0 8.0 % figure 1. definitions of overshoot and start-up delay. c trl vout 50% start-up delay 90% overshoot
da9161.010 28 january 2004 7 (17) typical performance characteristics v in = 3.8 v, t a = +27c, i out = 50 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. mas9161a2 start-up 0 0.5 1 1.5 2 2.5 3 time (500 s/div) voltage (v) vout ctrl mas9161a4 start-up 0 0.5 1 1.5 2 2.5 time (500 s/div) voltage (v) vout ctrl figure 2. mas9161a2 typical start-up. figure 3. mas9161a4 typical start-up. v in = 2.8 v. mas9161 psrr vs. frequency 0 10 20 30 40 50 60 0.1 1 10 100 1000 frequency (khz) psrr (db) iout = 10 ma iout = 50 ma mas9161 noise spectral density 0 200 400 600 800 1000 1200 1400 1600 1800 0.1 1 10 100 frequency (khz) noise spectral density (nv/hz ? ) noise sp ectral density (nv / hz) figure 4. psrr vs. frequency. t a = +25c. figure 5. output noise spectral density. mas9161 load transient response -80 -60 -40 -20 0 20 40 60 time (200 s/div) output voltage 0 30 60 90 120 150 180 210 output current (ma) ? vout iout output voltage change (mv) mas9161 load transient response -150 -100 -50 0 50 100 time (200 s/div) output voltage 0 50 100 150 200 250 output current (ma) ? vout iout output voltage change (mv) figure 6. load transient response. i out = 1?50 ma in 10 s. figure 7. load transient response. i out = 1?50 ma in 2 s.
da9161.010 28 january 2004 8 (17) typical performance characteristics v in = 3.8 v, t a = +27c, i out = 50 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. mas9161 load transient response -400 -300 -200 -100 0 100 200 time (200 s/div) output voltage 0 60 120 180 240 300 360 output current (ma) ? vout iout output voltage change (mv) mas9161a2 ground pin current vs. supply voltage 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 1.8 2.2 2.6 3 3.4 3.8 4.2 4.6 5 supply voltage (v) ground pin current (ma) t = +25c t = -40c t = +85c figure 8. load transient response. i out = 1?100 ma in 2 s. figure 9. mas9161a2 ground pin current against the supply voltage. i out = 0 ma. mas9161a2 output voltage vs. load current (operation of the current limiter), v in = 3.8 v 0 0.5 1 1.5 2 2.5 3 0 25 50 75 100 125 150 175 200 load current (ma) output voltage (v) t = +25c t = -40c t = +85c mas9161a4 output voltage vs. load current (operation of the current limiter), v in = 2.8 v 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 20 40 60 80 100 120 140 160 load current (ma) output voltage (v) t = +25c t = -40c t = +85c figure 10. mas9161a2 output voltage vs. load current (operation of the current limiter). figure 11. mas9161a4 output voltage vs. load current (operation of the current limiter). v in = 2.8 v. mas9161 ground pin current vs. load current 0 10 20 30 40 50 60 70 0 1020304050607080 load current (ma) ground pin current (a) t = +25c t = -40c t = +85c mas9161a2 dropout voltage vs. load current 0 50 100 150 200 250 0 1020304050607080 load current (ma) dropout voltage (mv) t = +25c t = -40c t = +85c figure 12. ground pin current vs. load current. figure 13. mas9161a2 dropout voltage vs. load current.
da9161.010 28 january 2004 9 (17) typical performance characteristics v in = 3.8 v, t a = +27c, i out = 50 ma, c in = 1.0 f, c l = 1.0 f, v ctrl = 2 v, unless otherwise specified. mas9161a2 output voltage vs. supply voltage, i out = 80 ma 1.6 1.8 2 2.2 2.4 2.6 2.8 3 2 2.5 3 3.5 4 4.5 5 5.5 6 supply voltage (v) output voltage (v) t = +25c t = -40c t = +85c mas9161a2 output voltage vs. supply voltage, i out = 1 ma 2 2.2 2.4 2.6 2.8 3 2 2.5 3 3.5 4 4.5 5 5.5 6 supply voltage (v) output voltage (v) t = +25c t = -40c t = +85c figure 14. mas9161a2 output voltage vs. supply voltage. i out = 80 ma figure 15. mas9161a2 output voltage vs. supply voltage. i out = 1 ma. mas9161a4 output voltage vs. supply voltage, i out = 80 ma 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 1 1.5 2 2.5 3 3.5 4 4.5 5 supply voltage (v) output voltage (v) t = +25c t = -40c t = +85c mas9161a4 output voltage vs. supply voltage, i out = 50 ma 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 1 1.5 2 2.5 3 3.5 4 4.5 5 supply voltage (v) output voltage (v) t = +25c t = -40c t = +85c figure 16. mas9161a4 output voltage vs. supply voltage. i out = 80 ma. figure 17. mas9161a4 output voltage vs. supply voltage. i out = 50 ma. mas9161a2 output voltage vs. temperature 2.79 2.792 2.794 2.796 2.798 2.8 2.802 2.804 2.806 2.808 2.81 -40-20 0 20406080 temperature (c) output voltage (v) mas9161a4 output voltage vs. temperature 1.79 1.792 1.794 1.796 1.798 1.8 1.802 1.804 1.806 1.808 1.81 -40-20 0 20406080 temperature (c) output voltage (v) figure 18. mas9161a2 output voltage vs. temperature. figure 19. mas9161a4 output voltage vs. temperature. v in = 2.8 v.
da9161.010 28 january 2004 10 (17) application information mas9161 is available in two different versions: version a includes an auto-discharge function, wherein a shutdown transistor turns on and discharges the output capacitor, when mas9161 is turned off. thus vout pin reaches the value 0 v fast after shut-down. version b does not feature the auto-discharge function. the voltage in vout pin, when mas9161 is turned off, depends on the load circuits leakage: if the lo ad has big leakage current, vout rapidly drops to the value 0 v, but if the leakage current is non-existing, vout pin stays in v out(nom) value. parameter symbol min typ max unit note output capacitance effective series resistance c l esr 0.6 0 1.0 3 f ? 1. the selected capacitor has to meet the minimum capacitance requirement in all operating conditions. 2. ceramic and film capacitors can be used. 1. when within this range stable with all i out = 0 ma?80 ma values. input capacitance c in 0.23 f 1. a big enough input capacitance is needed to prevent possible impedance interactions between the supply and mas9161. 2. ceramic, tantalum, and film capacitors can be used. if using a tantalum capacitor, it should be checked that surge current rating is sufficient for the application. in the case that the inductance between a battery and mas9161 is very small (< 0.1 h) 0.22 f input capacitor is sufficient. values given on the table are minimum requirements unless otherwise specified. when selecting capacitors, tolerance and tempera ture coefficient must be considered to make sure that the requirement is met in all potential operating conditions . ctrl vin vout over current / over temperature protection voltage reference + c in c l gnd n/c 1 2 3 4 5
da9161.010 28 january 2004 11 (17) package (tsot-5) outline symbol min nom max unit a -- -- 1.00 mm a1 0.01 0.05 0.10 mm a2 0.84 0.87 0.90 mm b 0.30 -- 0.45 mm c 0.12 0.127 0.20 mm d 2.90bsc mm e 2.80bsc mm e1 1.60bsc mm e 0.95bsc mm e1 1.90bsc mm l 0.30 0.40 0.50 mm l2 0.25bsc mm q 4 10 12 l2 gauge plane a c l c l c l l e1 be c l e e1 d a2 a1 c 1) package outline dimensions inclusive of metal burr & solder plating 2) package outline exclusive of mold flash 3) all specifications comply to jedec mo193 4) q refers to all package draft angles
da9161.010 28 january 2004 12 (17) package (wl-csp) outline 100-150 480 25 coplanarity across chipsite (die) 10 1400 (-50 +0) all dimensions in microns, drawings not to scale. 890 (-50 +0) 500 5 200 20 bottom view 61xy backside marking pin a1 designator 500 5 definitions (see ordering information p. 15): x = package option y = output voltage option
da9161.010 28 january 2004 13 (17) soldering information for eutectic sn/pb tsot-5 and wl-csp resistance to soldering heat according to rsh test iec 68-2-58/20 2*220 c maximum temperature 240 c maximum number of reflow cycles 3 reflow profile thermal profile parameters stated in jesd22-a113 should not be exceeded. http://www.jedec.org seating plane co-planarity max 0.08 mm lead finish solder plate 7.62 - 25.4 m, material sn 85% pb 15% wl-csp balls material sn 63% pb 37% (eutectic) for lead-free tsot-5 resistance to soldering heat according to rsh test iec 68-2-58/20 maximum temperature 260 c maximum number of reflow cycles 3 reflow profile thermal profile parameters stated in jesd22-a113 should not be exceeded. http://www.jedec.org seating plane co-planarity max 0.08 mm lead finish solder plate 7.62 - 25.4 m, material matte tin
da9161.010 28 january 2004 14 (17) tape & reel specifications (tsot-5) other dimensions according to eia-481 standard 3000 components on each reel dimension min max unit a 178 mm b 1.5 mm c 12.80 13.50 mm d 20.2 mm n 50 mm w 1 (measured at hub) 8.4 9.9 mm w 2 (measured at hub) 14.4 mm w 3 (includes flange distortion at outer edge) 7.9 10.9 mm trailer 160 mm leader 390, of which minimum 160 mm of empty carrier tape sealed with cover tape mm a b d w3 w2 c w1 n feeding direction 8 mm 4 mm
da9161.010 28 january 2004 15 (17) ordering information version a: mas9161 with auto-discharge function version b: mas9161 without auto-discharge function (see p. 10 for definition of auto-discharge function) for pin order definition see the pin description on page 2. product code output voltage version top marking pin order package comments mas9161b5ga06 1.5 v b 61b5 tsot-5 tape and reel mas9161b5gb06 1.5 v b 61b5 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161b5ca11 1.5 v b 61b5 11 wl-csp tape and reel mas9161b5ca12 1.5 v b 61y5 12 wl-csp tape and reel mas9161aga4-t 1.8 v a 61a4 tsot-5 tape and reel mas9161b4ga06 1.8 v b 61b4 tsot-5 tape and reel mas9161agb4-t 1.8 v a 61a4 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161b4gb06 1.8 v b 61b4 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161a4ca11 1.8 v a 61a4 11 wl-csp tape and reel mas9161b4ca11 1.8 v b 61b4 11 wl-csp tape and reel mas9161a4ca12 1.8 v a 61z4 12 wl-csp tape and reel mas9161b4ca12 1.8 v b 61y4 12 wl-csp tape and reel mas9161aga3-t 2.5 v a 61a3 tsot-5 tape and reel mas9161b3ga06 2.5 v b 61b3 tsot-5 tape and reel mas9161agb3-t 2.5 v a 61a3 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161b3gb06 2.5 v b 61b3 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161a3ca11 2.5 v a 61a3 11 wl-csp tape and reel mas9161b3ca11 2.5 v b 61b3 11 wl-csp tape and reel mas9161a3ca12 2.5 v a 61z3 12 wl-csp tape and reel mas9161b3ca12 2.5 v b 61y3 12 wl-csp tape and reel mas9161agae-t 2.65 v a 61ae tsot-5 tape and reel mas9161bega06 2.65 v b 61be tsot-5 tape and reel mas9161agbe-t 2.65 v a 61ae (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161begb06 2.65 v b 61be (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161aeca11 2.65 v a 61ae 11 wl-csp tape and reel mas9161beca11 2.65 v b 61be 11 wl-csp tape and reel mas9161aeca12 2.65 v a 61ze 12 wl-csp tape and reel mas9161beca12 2.65 v b 61ye 12 wl-csp tape and reel
da9161.010 28 january 2004 16 (17) product code output voltage version top marking pin order package comments mas9161aga2-t 2.8 v a 61a2 tsot-5 tape and reel mas9161b2ga06 2.8 v b 61b2 tsot-5 tape and reel mas9161agb2-t 2.8 v a 61a2 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161b2gb06 2.8 v b 61b2 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161a2ca11 2.8 v a 61a2 11 wl-csp tape and reel mas9161b2ca11 2.8 v b 61b2 11 wl-csp tape and reel mas9161a2ca12 2.8 v a 61z2 12 wl-csp tape and reel mas9161b2ca12 2.8 v b 61y2 12 wl-csp tape and reel mas9161aga7-t 2.9 v a 61a7 tsot-5 tape and reel mas9161b7ga06 2.9 v b 61b7 tsot-5 tape and reel mas9161agb7-t 2.9 v a 61a7 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161b7gb06 2.9 v b 61b7 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161a7ca11 2.9 v a 61a7 11 wl-csp tape and reel mas9161b7ca11 2.9 v b 61b7 11 wl-csp tape and reel mas9161a7ca12 2.9 v a 61z7 12 wl-csp tape and reel mas9161b7ca12 2.9 v b 61y7 12 wl-csp tape and reel mas9161aga6-t 3.0 v a 61a6 tsot-5 tape and reel mas9161b6ga06 3.0 v b 61b6 tsot-5 tape and reel mas9161agb6-t 3.0 v a 61a6 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161b6gb06 3.0 v b 61b6 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161a6ca11 3.0 v a 61a6 11 wl-csp tape and reel mas9161b6ca11 3.0 v b 61b6 11 wl-csp tape and reel mas9161a6ca12 3.0 v a 61z6 12 wl-csp tape and reel mas9161b6ca12 3.0 v b 61y6 12 wl-csp tape and reel mas9161agad-t 3.1 v a 61ad tsot-5 tape and reel mas9161bdga06 3.1 v b 61bd tsot-5 tape and reel mas9161agbd-t 3.1 v a 61ad (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161bdgb06 3.1 v b 61bd (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161adca11 3.1 v a 61ad 11 wl-csp tape and reel mas9161bdca11 3.1 v b 61bd 11 wl-csp tape and reel mas9161adca12 3.1 v a 61zd 12 wl-csp tape and reel mas9161bdca12 3.1 v b 61yd 12 wl-csp tape and reel
da9161.010 28 january 2004 17 (17) product code output voltage version top marking pin order package comments mas9161aga1-t 3.3 v a 61a1 tsot-5 tape and reel mas9161b1ga06 3.3 v b 61b1 tsot-5 tape and reel mas9161agb1-t 3.3 v a 61a1 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel MAS9161B1GB06 3.3 v b 61b1 (b in the bottom marking to indicate lead-free) tsot-5 lead-free tape and reel mas9161a1ca11 3.3 v a 61a1 11 wl-csp tape and reel mas9161b1ca11 3.3 v b 61b1 11 wl-csp tape and reel mas9161a1ca12 3.3 v a 61z1 12 wl-csp tape and reel mas9161b1ca12 3.3 v b 61y1 12 wl-csp tape and reel for more voltage options contact micro analog systems oy. offered in north america by evox rifa, inc. 300 tri-state international, suite 375 lincolnshire, il 60069 usa tel: 1 847 948 9511 fax: 1 847 948 9320 email: service@evoxrifa.com web: http://www.evoxrifa.com/n_america micro analog systems oy contacts micro analog systems oy kamreerintie 2, p.o.box 51 fin-02771 espoo, finland http://www.mas-oy.com tel. (09) 80 521 tel. int. +358 9 80 521 telefax +358 9 805 3213 e-mail: info@mas-oy.com notice micro analog systems oy reserves the right to make changes to the products contained in this data sheet in order to improve the design or performance and to supply the best possible products. micro analog systems oy assumes no responsibility for the use of any circ uits shown in this data sheet, conveys no license under any patent or other rights unless otherwise specified in this data sheet, and make s no claim that the circuits are free from patent infringement. applications for any devices shown in this data sheet are for illustration only and micro analog systems oy makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification.

▲Up To Search▲

Price & Availability of MAS9161B1GB06

	To Download MAS9161B1GB06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .